Home / Guides / Density Guide
BUYER GUIDE · DENSITY

Hair System Density: 90%, 110% and 130% Explained

Density is the specification most often ordered wrong, and it is the one that most changes both the unit cost and whether the piece looks like hair. It is a percentage of a full head of hair at that area — not an absolute volume, and not a quality grade.

Last reviewed November 2026

Every hair system is quoted at a density percentage. The reference point is a full, unstyled head of hair of the same hair type. So 90% means the piece carries nine tenths of that volume, and 130% means nearly a third more. Two pieces quoted at the same percentage but built at different hair lengths will look different, which is why density and length are quoted together.

The five levels we build

DensityReads asBest suited toCost effect
90% lightFine, natural, slightly thinningOlder wearers, natural look, hot climatesLowest
100% medium-lightAverage head of hairMost first orders in most marketsLow
110% mediumFull without looking heavyPhotography, professional wear, default recommendationBase
120% medium-fullNoticeably fullYounger customers, formal stylingHigher
130% mediumDense, styled lookStage, camera, customers who want volumeHighest

Why 110% is the usual first order

At 110% the piece photographs as a full head of hair and reads as normal in person. At 130% it photographs well but can read as heavy at conversational distance, particularly on a light base and a young wearer. At 90% it photographs thin even when it looks correct in a room.

Most buyers who order 130% for their first stock end up discounting it, because their customers expected something that looked like their own hair rather than a styled piece. Ordering 110% first and moving down to 100% once the buyer knows their customers is usually cheaper than starting high.

Density interacts with the base

Density does not behave the same way on every construction. A knotless lace front carries less hair at the edge by design, so a 130% knotless front produces a blunt, heavy hairline — the opposite of what knotless construction is for. Lace fronts should stay at 90–110%. A 130% density belongs on a fine mono or a knotted skin base, where the edge is built to carry it.

Density and cost

Density sets the volume of hair used per piece, so it moves the unit cost directly. Moving from 110% to 130% raises cost more than moving from 90% to 110%, because the increase is applied across the whole cap rather than at the front. This is why a buyer comparing two quotations should compare the density as well as the price — a cheaper quote at 90% is not the same product as a quote at 130%.

Regional patterns buyers should know

Practically, buyers in cooler climates and older customer bases settle at 90–100%. Buyers serving younger customers, camera-facing work, or markets where a full style is the norm settle at 120–130%. Buyers who have not established a market should ignore both and start at 110%, because it is the only level that survives all of those expectations without an immediate return.

Density and hair length together

A 130% density at 6-inch hair reads much heavier than the same density at 4-inch hair, because longer hair has more visible volume per square inch. When a buyer raises hair length, density should usually come down one level to compensate. Reporting both numbers in the specification sheet is what prevents this being discovered on a customer's head.

A useful rule: raise hair length OR raise density, rarely both at once. Doing both produces a piece that looks dense and unnatural, and it is the most common specification mistake on a first custom order.

How to test density before committing

Order two samples of the same construction at 100% and 130%. Fitting both on the same wearer in daylight settles the question faster than any description, because density perception depends on the wearer's own hair, skin tone and age. Two samples cost far less than a discounted stock run.

FAQ

Questions on this guide

Questions buyers ask before ordering. If yours is not covered, send it on WhatsApp and Ryan will answer it directly.

Is 130% density too much?

Not inherently, but it is too much for a knotless lace front and usually too much for a first order in an unknown market. It is appropriate for fine mono, knotted skin, and markets that expect a full styled look.

Does higher density last longer?

No. Density does not extend service life; base construction and handling do. A dense piece on a fragile base will still fail at the perimeter.

Can density be reduced later?

Not in the same piece. A piece built at 130% can be thinned by a stylist to a degree, but the result is uneven compared with ordering the correct density.

Let’s Talk Business

Need a Wholesale Catalogue or Quotation?

Send Ryan your preferred base, size, density, color and approximate quantity. We’ll reply with the most relevant products and wholesale details.

WA WA