Polyurethane skin is the most forgiving base for a buyer's first order and the easiest base for a customer to live with day to day. Crownera produces PU systems across four thicknesses, from a 0.02 mm ultra-thin with an all V-loop front to a 0.08 mm build that survives a full service cycle.
The four thicknesses are not a quality ladder. Each one answers a different wearer. A 0.02 mm base disappears against skin and is the closest thing to a bare scalp in the range, but it is fragile and needs careful handling. A 0.08 mm base is visible if you look for the edge, yet it takes repeated removal, cleaning and re-application without tearing.
| Thickness | Front construction | Service life | Wearer profile |
|---|---|---|---|
| 0.02 mm ultra-thin | All V-loop, knotless | Shortest, handle with care | Short-term, high-visibility use; camera work |
| 0.03 mm | V-loop front, knotted rest | Short to medium | Customers who want the thinnest edge |
| 0.04 mm super thin | 1/8 inch V-loop front, knotted rest | Medium | The most common first order |
| 0.08 mm durable | Knotted throughout | Longest in the PU range | Active wearers and hot climates |
At 0.04 mm the base is thin enough that the front edge does not read as a line under normal light, while the body still resists the folding and stretching that ruins a 0.02 mm piece within a month. For a buyer who does not yet know their market's tolerance, 0.04 mm is the specification that produces the fewest returns and the fewest complaints.
It is also the easiest to support: the wearer can use glue or tape, the clean-up is straightforward, and the piece does not need to be replaced at the first sign of wear.
Skin wins on durability, clean-up speed and tape or glue compatibility; it loses on breathability, because PU does not pass air the way lace does. Lace wins on airflow and the finest hairline; it loses on fragility and on the amount of care it needs at the perimeter. A buyer selling into a hot, humid market should weight lace more heavily than a buyer selling into a temperate one.
Thickness, cap size, density, hair length, curl, colour and grey percentage, plus the approximate quantity per style. Thickness is quoted in millimetres because 0.02 and 0.04 are genuinely different products; a supplier who quotes a single number for skin is describing a category, not a specification.
It is the thickness of the polyurethane base, measured in millimetres. At 0.02 mm the base is close to invisible on skin, but it is the most fragile build in the range and needs careful handling during removal and cleaning.
Yes, and tape is usually the easier route for a first-time wearer. Glue gives a longer hold but takes more clean-up time. Both work on PU; neither works well on bare lace.
It depends on thickness and handling. A 0.08 mm build can run through several months of regular service; a 0.02 mm build is best treated as a short-cycle or high-visibility piece and replaced sooner.
Yes. Caps are built to the buyer's measurement rather than a fixed size grid, so full-coverage and non-standard sizes are quoted the same way as standard ones.
Send Ryan your preferred base, size, density, color and approximate quantity. We’ll reply with the most relevant products and wholesale details.