Home / Lace Hair Systems
CROWNERA · LACE CONSTRUCTION

Lace Hair Systems: French and Swiss Lace, Wholesale

Lace is the construction buyers choose when the hairline has to survive being looked at closely. Crownera produces French lace and Swiss lace systems with knotless or bleached fronts, plus lace-and-PU hybrids where a stronger perimeter is needed for tape or glue.

Swiss lace 0.02–0.03 mmKnotless or bleached front90–130% densityHybrid lace + PU available

French lace and Swiss lace are not interchangeable

The two laces differ in mesh fineness, and that difference decides which customer each one serves. French lace has a slightly coarser, stronger mesh: it holds its shape through repeated removal and clean-up, and it tolerates a heavier density without the front edge looking crowded. Swiss lace is finer and softer, which produces the least visible hairline of any construction we make, at the cost of a shorter service life and more careful handling.

French laceSwiss lace
MeshSlightly coarser, strongerVery fine, soft
Hairline realismVery goodBest available
Service lifeLonger, tolerates repeat clean-upShorter, needs gentler handling
Density ceilingComfortable to 130%Best kept at 90–110%
Typical buyerSalons running volumeStudios selling a premium service

Where the front is knotted, and where it is not

A knotless front means the hair is knotted further back and the front edge is left as fine lace, so no dots sit on the hairline. A bleached front keeps knots but lightens them to skin tone. Both read as natural at normal viewing distance; knotless is the safer choice under strong light, bleached knots the more affordable one.

Knotless construction costs more because it removes hair density at the front by design: the front inch carries less hair, so more hand work is required to keep the transition soft. Buyers who skim on this and order a 130% knotless front usually get a piece that looks heavy at the edge, which defeats the purpose.

Hybrid lace builds

  • Lace + PU: French lace body with a 1-inch or 1¼-inch poly skin perimeter. The front stays natural, the sides and back hold tape reliably.
  • BIO-lace 0.08 mm: a half-inch French lace front on a PU body, for buyers who want lace realism at the hairline with skin durability elsewhere.
  • Hollywood: half-inch French lace front and centre with a 1-inch PU perimeter — the most balanced hybrid we produce.
  • Q6: French lace centre with thin skin temples, sides and back, which suits wearers whose sides move most.

Density, size and colour for lace orders

Lace systems are quoted at 90% (light), 100% (medium-light), 110% (medium) and 130% (medium). Cap sizes are built to the buyer's measurement rather than to a fixed grid, and colour is matched from a hair ring or daylight photograph with a stated grey percentage.

Choosing lace for a new market

Buyers entering a market that already has cheap products usually lose on price and win on hairline. Lace, and specifically a knotless or Swiss front, is the clearest visible difference between a piece that looks like hair and one that looks like a hairpiece. That is why we recommend lace as the first sample for a premium positioning, and skin as the first sample for a volume positioning.

FAQ

Common Questions

Questions buyers ask before ordering. If yours is not covered, send it on WhatsApp and Ryan will answer it directly.

Which lace is better, French or Swiss?

Swiss lace gives the most natural hairline but has a shorter service life and needs gentler handling. French lace is stronger, holds heavier density better and survives repeat clean-up. Most buyers stock French for volume and Swiss for premium.

Can lace systems be used with tape?

Yes, but tape on bare lace is less reliable. If the buyer's customers use tape, order a lace-and-PU hybrid so the perimeter carries the adhesive and the lace is kept at the front.

What density should I order first?

110% medium-light is the safest first order in most markets. It reads full on camera without looking heavy in person, and it can be walked back to 100% once the buyer sees how their customers style it.

Do you make custom lace sizes?

Yes. Lace systems are built to the buyer's cap measurement, including non-standard temple and nape shapes, and the size is confirmed on the proforma invoice before production.

Let’s Talk Business

Need a Wholesale Catalogue or Quotation?

Send Ryan your preferred base, size, density, color and approximate quantity. We’ll reply with the most relevant products and wholesale details.

WA WA